Own-Brand & Private-Label Programs
Your app, your shell, your carton.
The 7L body and ultra-thin motor are already tooled, so a private-label run needs your color and logo rather than a new mold - and the Wi-Fi app can carry your brand name too.
Custom 2-Cat Automatic Feeder, equipped with WiFi, camera, two-way audio call and infrared sensor.
The two-cat 4K Automatic Cat Feeder with Camera is built for multi-cat homes and facilities that need to see and feed remotely from one app. Engineered for pet tech own-brands, specialty retail chains and international distributors.
Your app, your shell, your carton.
The 7L body and ultra-thin motor are already tooled, so a private-label run needs your color and logo rather than a new mold - and the Wi-Fi app can carry your brand name too.
Made for two cats and dark rooms.
The 4K camera, 940nm infrared sensor and two-way audio turn feeding into a daily check-in from the phone, while the 7L hopper covers a long weekend away.
Container-load supply with paperwork ready.
CE, FCC and RoHS documentation, retail-ready cartons, and multi-device management so one app can run a whole room of feeders.
There are two solutions for dual-channel feeding. The first is for the same type of food. In this case, the two channels share one food outlet. The motor rotates in a single direction to drive food out from the outlet. The second solution is for different types of food. Here, both channels are independent, with separate food hoppers and two individual dispensing passages, each dispensing a different food. The motors cannot rotate in the same direction; each channel is independently controlled. The motor can rotate clockwise or counterclockwise to dispense the required type of food.
First, the food hopper features a high-gloss large rounded inner wall. The high-gloss surface resists food adhesion, and large rounded corners eliminate dead corners for dirt, allowing every area to be rinsed thoroughly. Second, spring latches are fitted on the left and right hoppers. Slide the latches toward the opening to easily remove the hoppers. The food stirring turntable inside the hopper is made of soft silicone. It can be taken out easily by leveraging the elasticity of the soft material without any tools.
2、The food bowl base adopts a ball detent positioning structure. It prevents the base from being pulled out accidentally and produces a crisp clicking sound once fully seated, providing tactile feedback for users. Soft rubber foot pads insert into the base. The base is designed with air vents to avoid air trapping during assembly of the soft rubber, ensuring tighter and more reliable fitting. All components can be disassembled by hand for effortless cleaning.
The food stirring assembly inside the hopper uses food-grade silicone with a hardness of Shore 75. Made via liquid injection molding, the silicone part is integrated with buckles that fasten onto the motor drive shaft to drive silicone stirring. It breaks up damp and clumped pet food to prevent jamming. The silicone features good elasticity and is tightly fitted onto the rotating shaft with an interference fit to avoid loosening. A wiper blade is added at the contact point between the silicone and the bottom of the hopper to remove accumulated grime. The structure is easy to rinse with clean water.
1、Custom ultra-thin special-shaped motor. This motor can be adapted to ID design. It integrates a dual-contact sensor and high-torque gearbox as a compact DC motor.
2、An aesthetically pleasing product relies on customized internal components. Off-the-shelf parts on the market cannot meet industrial design requirements. Custom layout, shape, space allocation and positioning of internal parts are required.
3、A built-in sensor inside the motor detects motor speed, position, food jamming alerts and low-food alerts. It transmits signals to the main control board. The main control board issues commands for forward and reverse rotation of the motor based on sensor data. This integrated design features safety, stability, low overall cost and easy assembly.
1、Custom 940nm infrared probes, one mounted on the left and one on the right inside the main unit. The hopper section at the probe position is made of transparent material to allow infrared penetration. When food is present, the signal is blocked, indicating sufficient food. The 940nm probes are paired with light filter strips to resist interference from ambient natural light and artificial lighting and prevent sensor malfunction, delivering accuracy up to 0.02 inches.
2、For customers with structural constraints, our reflective probes are also an option. The reflective probe can measure food level, is installed at the bottom of the unit, and features a compact form factor for easy installation.
Both bowls run on their own schedule and the 4K camera shows who ate, so one unit covers a two-cat home, a cat cafe, or a breeding cattery.
The feeder hopper shall adopt a sealed structure to block ingress of humid air, which would otherwise degrade food quality.
An infrared sensor shall be installed at the base of the feeder hopper to detect food shortage and remind users to refill pet food.
The feeder food outlet adopts offset rotary dial sealing. A silicone sealing ring is fitted onto the rotary dial structure. After feeding is completed, the rotary dial seals the food outlet to block moisture and insects from entering the machine.
An infrared sensor is installed at the feeder food outlet. When large kibble causes a jam, the sensor sends a signal to the motor. The motor then reverses rotation to clear the blockage.
To protect user privacy, the camera pet feeder supports one-tap camera shutoff via APP. A physical shutter mechanism is built into the housing to physically cover the camera lens for guaranteed privacy protection.
We provide full-stack OEM/ODM manufacturing covering hardware, software, motor customization, structural design and mold fabrication for this product.
Get wholesale pricing and rapid sample delivery with standard logo silk-screening options.
Private molding, custom PCBA/tooling, compliance certifications, and bid protection.
Need deployment for large pet facilities or private enterprise projects? Explore our multi-device ecosystem setup solutions.
You can integrate this device into your platform via API (Application Programming Interface) / SDK (Software Development Kit), or load custom edge pet recognition models.
Customized brand firmware and housing branding start at 500 units. Prototype sample orders supported from 1 unit.
Samples: 5-7 working days.
Standard Mass Bulk OEM Production: 15-25 days.
Standard Retail Package Includes:
Our dual-cat feeders are manufactured under professional production supervision. The camera module, Wi-Fi board, motor and power adapter are tested before each unit leaves the line, and the certifications below are what allow the product to be sold across the European Union, North America and the United Kingdom.
When two cats share one feeder in public areas, it saves substantial space and prevents food competition between cats.
For use at animal rescue shelters. Stray cats can use the pet feeder to ease their sense of insecurity. Feeding can be achieved without human proximity.
Custom automatic feeders deployed in pet shelters.Some cat owners have to rehome their pets or send them to shelters for various reasons. Cats may fight over food with other resident cats at the shelter. The dual-bowl feeder can resolve this issue.
رقم الموديل
PETJPGW85
الخامة
ABS+PC+304/Ceramics
أبعاد المنتج
13.54"L x 13.31"W x 14.96"H
Hopper Capacity
7L
Wireless Connection
2.4G/5G
Feeding Schedule
1–8 meals per day
Feeding Portion
1–20 portions per meal
Adapter Specifications
Input: 100-240V~, 50/60Hz, 0.4A,Output: 5V,
Factory Certifications
FCC ,CE,RoHS
Color
White, Black
Power Source
Corded Electric
tem Weight
2.2KG
Microphone / Intercom
Integrated High-Gain Two-way Audio Microphone
Physical Local Storage
32GB Micro SD Card Included (Supports Up to 128GB)
This feeder comes with a 4K sensor, though video is mostly streamed at 1080P due to network bandwidth.
The feeder motor can operate for up to 100,000 hours.
If only minor APP function adjustments are needed, development normally takes 30 days.
Mold development for the feeder normally takes 50 days.
A new hardware design typically takes 1.5 months, covering schematic design, PCB layout, prototype fabrication, soldering and testing.
Top Tier OEM/ODM 20+ Years | Custom Large Smart Pet Products
نحن شركة عالية التقنية تجمع البحث والتطوير والإنتاج والمبيعات، ولدينا فريق متخصص في التصميم الصناعي والإلكتروني والإنشائي. حاصلون على ISO9001 وBSCI ونخدم أكثر من 200 عميل حول العالم.
يسعدنا التواصل معك!